Griffon Adhesives and sealants
Griffon wood adhesive ST10® D2 bottle 250g
Moisture-resistant, white wood glue based on PVAC. Application Areas For moisture-resistant (D2) bonding and laminations of almost all types of soft, hard, and exotic woods. Suitable for precise, non-load-bearing wooden constructions from various wood joints, such as finger joints, dovetail joints, mortise and tenon joints, dowels, and tongues. Suitable for interior applications such as doors and furniture. For surface bonding of wood, soft and hard fiberboards, chipboard, multiplex, MDF, paper, and cardboard. Also suitable for laminating veneer and hard plastic panels (HPL; Formica, Duropal, Resopal) on wood substrates. D2: Interior areas where occasionally there is a short-term increase in relative humidity, but the moisture content of the wood remains below 18%. Properties For interior applications Moisture-resistant Transparent when dry Solvent-free Paintable
Content: 0.25 Kilogramm (€17.56 / 1 Kilogramm)
Griffon aluminium tape 10cm x 20m
High temperature resistant aluminium tape. Field of application Suitable for sealing, insulating, repairing, protecting, strengthening, and joining of, e.g., (insulated) air treatment and waste gas drains, pipe fittings, insulation material, and foils. Properties: Very high temperature resistance Very high adhesive strength UV resistant Moisture resistant Vapour-proof Thickness 80 μm
Content: 20 lfd. Meter (€0.83 / 1 lfd. Meter)
Griffon aluminium tape HT tape 10cm x 50m
High temperature resistant aluminium tape. Field of application Suitable for sealing, insulating, repairing, protecting, strengthening, and joining of, e.g., (insulated) air treatment and waste gas drains, pipe fittings, insulation material, and foils. Properties: Very high temperature resistance Very high adhesive strength UV resistant Moisture resistant Vapour-proof Thickness 80 μm
Content: 50 lfd. Meter (€1.10 / 1 lfd. Meter)
Griffon aluminium tape HT tape 5cm x 50m
High temperature resistant aluminium tape. Field of application Suitable for sealing, insulating, repairing, protecting, strengthening, and joining of, e.g., (insulated) air treatment and waste gas drains, pipe fittings, insulation material, and foils. Properties: Very high temperature resistance Very high adhesive strength UV resistant Moisture resistant Vapour-proof Thickness 80 μm
Content: 50 lfd. Meter (€0.55 / 1 lfd. Meter)
Griffon aluminium tape tape 5cm x 20m
High temperature resistant aluminium tape. Field of application Suitable for sealing, insulating, repairing, protecting, strengthening, and joining of, e.g., (insulated) air treatment and waste gas drains, pipe fittings, insulation material, and foils. Properties: Very high temperature resistance Very high adhesive strength UV resistant Moisture resistant Vapour-proof Thickness 80 μm
Content: 20 lfd. Meter (€0.44 / 1 lfd. Meter)
Griffon Aqua Max® grey, cartridge 425g
Water-resistant, solvent-free mounting adhesive and sealant based on SMP Polymer. Field of application For the bonding, assembly, and sealing of almost all materials on almost all surfaces. Extremely suitable for swimming pool construction, ponds, and agriculture. Suitable for all kinds of applications in and around the swimming pool such as for skimmers, edges, tiles, drains, roofing, outflow pipes, and dilatation joints. Furthermore, suitable for applications around ponds such as drains, conduits, and pond edges. Even suitable for underwater applications. Not suitable for PE, PP, PTFE, pure plaster, and bitumen. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties (Chlorine/sea) water resistant UV resistant Very high final bond strength Very high, permanent elasticity Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges Resistant to temperatures between -40°C and +100°C Paintable
Content: 0.425 Kilogramm (€33.60 / 1 Kilogramm)
Griffon Aqua Max® white, cartridge 425g
This water-resistant, solvent-free mounting adhesive and sealant is based on SMP Polymer. Field of application It's suitable for bonding, assembly, and sealing of almost all materials on nearly all surfaces. Specifically designed for swimming pool construction, ponds, and agricultural applications. Ideal for various swimming pool components such as skimmers, edges, tiles, drains, roofing, outflow pipes, and dilatation joints. Additionally, it can be used around ponds for drains, conduits, and pond edges. It's even suitable for underwater applications. Not recommended for use with PE, PP, PTFE, pure plaster, and bitumen. Always perform an adhesion test when gluing plastics, as adhesion may vary depending on the type and quality of the plastic. Properties (Chlorine/sea) water resistant UV resistant Very high final bond strength Very high, permanent elasticity Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges Resistant to temperatures between -40°C and +100°C Paintable
Content: 0.425 Kilogramm (€33.60 / 1 Kilogramm)
Griffon B-25 tin 500ml
Fast, thixotropic ABS cement. Field of application For joining pipes, sockets, and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Suitable for diameters up to 315 mm. Maximum pressure of 15 bar (PN 15). Maximum tolerances of 0.6 mm diametrical clearance and 0.2 mm press fit. Suitable for pipe systems conforming to EN 1455 and ISO 15493 (ABS). Properties: Fast Thixotropic Gap filling
Content: 0.5 Liter (€20.46 / 1 Liter)
Griffon cartridge gun
Professional cartridge gun for processing all types of adhesives and sealants. Field of application Suitable for processing all types of adhesives and sealants in cartridges such as silicone sealants, MS-polymers, Montagekits, PU construction adhesives, and acrylic sealants. Properties: Direct-stop function Non-drip system 360º rotation Exact dosage Robust metal housing Ladder Hook
Griffon cartridge gun (metal) professional
This professional cartridge gun is designed for precise and efficient application of various types of adhesives and sealants. Field of application It is suitable for processing all types of adhesives and sealants contained in cartridges, including silicone sealants, MS-polymers, Montagekits, PU construction adhesives, and acrylic sealants. Properties Direct-stop function to prevent excess flow when releasing the trigger Non-drip system for clean and controlled application 360º rotation for enhanced maneuverability and accessibility Exact dosage for precise application Robust metal housing for durability and longevity Ladder Hook for convenient storage and accessibility at elevated work areas
Griffon Chamfering Tool
This tool is designed for chamfering plastic pipes. Field of application It's suitable for use with plastic pipes made of PVC, PVC-C, ABS, PP, and PE, with diameters ranging from 16 mm to 63 mm. Properties Creates a chamfered edge of 15° Prevents adhesive 'crowding out'
Griffon Contact Bison Kit® can 10l
Aromatic-free, universal, liquid contact adhesive based on neoprene rubber. Field of application For surface bonding or laminating many materials that need to be bonded, submitted to a load and/or treated immediately. Ideal for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard and plywood on, for example, wood, multiplex plywood, chipboard or MDF. Also for bonding flexible insulation and foam materials, cork, leather and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Good workability Aromatics-free Universal Liquid Moisture resistant Frost resistant
Content: 10 Liter (€15.06 / 1 Liter)
Griffon Contact Bison Kit® can 5l
Aromatic-free, universal, liquid contact adhesive based on neoprene rubber. Field of application For surface bonding or laminating many materials that need to be bonded, submitted to a load and/or treated immediately. Ideal for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood on, for example, wood, multiplex plywood, chipboard, or MDF. Also for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Good workability Aromatics-free Universal Liquid Moisture resistant Frost resistant
Content: 5 Liter (€15.53 / 1 Liter)
Griffon Contact Bison Kit® jug 25l
Aromatic-free, universal, liquid contact adhesive based on neoprene rubber. Field of application For surface bonding or laminating many materials that need to be bonded, submitted to a load, and/or treated immediately. Ideal for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood on, for example, wood, multiplex plywood, chipboard, or MDF. Also for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties: Bonds immediately Heat resistant up to +70°C Good workability Aromatics-free Universal Liquid Moisture resistant Frost resistant
Content: 25 Liter (€14.22 / 1 Liter)
Griffon Contact Bison Kit® tin 750ml
Aromatic-free, universal, liquid contact adhesive based on neoprene rubber. Field of application For surface bonding or laminating many materials that need to be bonded, submitted to a load and/or treated immediately. Ideal for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood on, for example, wood, multiplex plywood, chipboard, or MDF. Also for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Good workability Aromatics-free Universal Liquid Moisture resistant Frost resistant
Content: 0.75 Liter (€18.53 / 1 Liter)
Griffon Contact Bison Tix® 10-litre bucket
Aromatic-free, universal, thixotropic contact adhesive based on neoprene rubber. Field of application (Surface) bonding or laminating many materials that need to be bonded, submitted to a load and/or treated immediately. Ideal for vertical applications and for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood on, for example, wood, multiplex plywood, chipboard, or MDF. Also for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Does not drip or form strings Good workability Aromatics-free Universal Thixotropic Moisture resistant Frost resistant
Content: 10 Liter (€16.69 / 1 Liter)
Griffon Contact Bison Tix® bucket 2.5l
This aromatic-free contact adhesive offers a universal solution for bonding various materials, based on neoprene rubber with thixotropic properties. Field of application It's suitable for (surface) bonding or laminating materials that require immediate load-bearing capabilities or treatment. Particularly effective for vertical applications and for materials under pressure or curved work, where clamping or pressing is not feasible. Surfaces to be bonded must fit completely. It's highly recommended for bonding and laminating metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood onto substrates like wood, multiplex plywood, chipboard, or MDF. Additionally, it works well for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Does not drip or form strings Good workability Aromatics-free Universal Thixotropic Moisture resistant Frost resistant
Content: 2.5 Liter (€19.22 / 1 Liter)
Griffon Contact Bison Tix® bucket 5l
Aromatic-free, universal, thixotropic contact adhesive based on neoprene rubber. Field of application (Surface) bonding or laminating many materials that need to be bonded, submitted to a load and/or treated immediately. Ideal for vertical applications and for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood on, for example, wood, multiplex plywood, chipboard, or MDF. Also for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Does not drip or form strings Good workability Aromatics-free Universal Thixotropic Moisture resistant Frost resistant
Content: 5 Liter (€17.45 / 1 Liter)
Griffon Contact Bison Tix® tin 750g
Aromatic-free, universal, thixotropic contact adhesive based on neoprene rubber. Field of application (Surface) bonding or laminating many materials that need to be bonded, submitted to a load and/or treated immediately. Ideal for vertical applications and for materials under pressure or curved work, whereby it is impossible to clamp or press. Surfaces to be bonded need to fit completely. Highly suitable for bonding and laminating of metal and hard synthetic panel boards (HPL; Formica, Duropal, Resopal), veneer, hardboard, and plywood on, for example, wood, multiplex plywood, chipboard, or MDF. Also for bonding flexible insulation and foam materials, cork, leather, and rubber. Not suitable for PE, PP, PTFE, and polystyrene foam (isomo). Properties Bonds immediately Heat resistant up to +70°C Does not drip or form strings Good workability Aromatics-free Universal Thixotropic Moisture resistant Frost resistant
Content: 0.75 Kilogramm (€22.15 / 1 Kilogramm)
Griffon EPDM Max black cartridge 465g
This universal, waterproof adhesive and sealant, formulated with strong initial grip based on SMP Polymer, is specially designed for EPDM applications on nearly all surfaces. Field of application It bonds and seals all European EPDM materials to a wide range of surfaces, including wood, metal, concrete, stone, and rigid foam insulation. Additionally, it's suitable for repairing cracks in EPDM and sealing seams between EPDM and various surfaces. However, it is not compatible with PE, PP, PTFE, bitumen, or neoprene. It is recommended to conduct a bonding test on each surface prior to application. Properties Adheres and seals to almost all surfaces Strong initial grip Easy and quick application (no primer required) Load-bearing after 24 hours Permanently flexible Does not shrink or blister Weather, water, and moisture resistant Temperature resistance: -40°C to +100°C Odourless Free from solvents, toluene, and phthalates
Content: 0.465 Kilogramm (€18.13 / 1 Kilogramm)
Griffon F-40 tin 1kg
Fixation agent for fixing polypropylene (PP) pipes and fittings. Field of application Intended for fixing polypropylene (PP) pipes and fittings with rubber sleeve (sliding socket) connections in drain systems. Particularly useful for preventing the drifting apart of pre-fab systems and folding of corners, such as during transport. Properties Thixotropic Black
Griffon Hydra® 1250 °C black cartridge 530g
Special refractory sealant that is heat-resistant up to 1250°C. Extremely suitable for application around fireplaces, stone ovens, barbecues, and the firebox of ceramic barbecues. Also suitable for bonding refractory bricks. Field of application Suitable for repairing and sealing cracks, seams, and joints in fireplaces, multi-burners, stoves, chimneys, and assembling and sealing concrete fireplaces and barbecues. Also suitable for temporary sealing of car and motorcycle exhaust systems. Bonds to metal, stone, and concrete. Not suitable for central heating systems and gas pipes. Properties: Heat resistant up to 1250°C Excellent adhesion to stone, metal, and concrete For indoor & outdoor applications Filling and non-shrinking Permanently weatherproof
Content: 0.53 Kilogramm (€10.83 / 1 Kilogramm)
Griffon Kolmat® Bucket 875g
Sealing paste for sealing metal threaded connections. Field of application For sealing metal threaded connections in, e.g., (drinking) water, central heating, gas, and compressed air systems. Use in combination with Kolmat® hemp or acrylic fiber. Gas: -20°C to +70°C, up to 5 bar. Water: 95°C, up to 16 bar; 130°C, up to 7 bar. Not suitable for oxygen. Properties Resistant to high temperature variations Not affected by gas and water Re-adjustable (does not cure) Removable Corrosion retardant
Content: 0.875 Kilogramm (€14.72 / 1 Kilogramm)
Griffon Kolmat® Easyfit bottle 50ml
Anaerobic sealant and securing agent for conical and cylindrical metal threaded connections. Field of application Designed for various applications including cold and warm water (CH), steam, gas, oil, glycol, diluted acids and bases, various solvents and fuels, and (compressed) air. This sealant can be applied to copper, brass, (galvanized) steel, and stainless steel among other materials. Suitable for diameters up to 4" (ISO 7-1) with a maximum clearance of 0.35 mm. Not suitable for concentrated acids and bases and oxygen. Properties Immediately loadable at low pressure Resistant to thermal shock and vibration Chemical resistant
Content: 0.05 Liter (€338.40 / 1 Liter)
Griffon Kolmat® Fibre Seal Roll 12mm x 15m
Impregnated, fibre-reinforced sealing tape. Field of application For sealing conical and cylindrical metal and plastic threaded connections. Suitable for (drinking) water, gas, LPG (gas), and (compressed) air. Applicable for materials such as copper, brass, (galvanized) steel, stainless steel, chrome, zinc, PVC, CPVC, and ABS. Gas: up to 5 bar pressure at -20°C to +70°C. Water: up to 16 bar pressure at +95 °C, up to 7 bar pressure at +130°C. Limited resistance to chemicals. Not suitable for oxygen. Properties Fibre-reinforced Re-adjustable > 180° Removable Immediately loadable
Content: 15 lfd. Meter (€0.33 / 1 lfd. Meter)
Griffon Kolmat® Hanf Spender 100g
For sealing metal threaded connections. Field of application For sealing metal threaded connections in, e.g., (drinking) water, central heating, gas, and compressed air systems. Use in combination with Kolmat® Fitterskit or Silpat®. Note: Not suitable for oxygen.
Content: 0.1 Kilogramm (€75.40 / 1 Kilogramm)
Griffon Kolmat® Hemp Dispenser 40g
For sealing metal threaded connections. Field of application For sealing metal threaded connections in, e.g., (drinking) water, central heating, gas, and compressed air systems. Use in combination with Kolmat® Fitterskit or Silpat®. Note: Not suitable for oxygen.
Content: 0.04 Kilogramm (€113.50 / 1 Kilogramm)
Griffon Kolmat® Hemp Dispenser 80g
For sealing metal threaded connections. Field of application For sealing metal threaded connections in, e.g., (drinking) water, central heating, gas, and compressed air systems. Use in combination with Kolmat® Fitterskit or Silpat®. Not suitable for oxygen.
Content: 0.08 Kilogramm (€76.00 / 1 Kilogramm)
Griffon Kolmat® hemp refill 100g
Sealant for metal threaded connections. Field of application Designed for sealing metal threaded connections in applications such as (drinking) water, central heating, gas, and compressed air systems. Use in conjunction with Kolmat® Fitterskit of Silpat®. Not suitable for use with oxygen.
Content: 0.1 Kilogramm (€52.40 / 1 Kilogramm)
Griffon Kolmat® Plastic Tube 125g
Sealant for sealing conical and cylindrical synthetic threaded connections. Field of application For sealing conical and cylindrical metal and synthetic threaded connections (synthetics/synthetics and synthetics/ metal). Suitable for cold and warm water and (compressed) air. Suitable for, e.g., PVC, CPVC and ABS eventually in combination with copper, brass, (galvanised) steel and stainless steel. Properties: THF-free Fast Liquid
Content: 0.125 Kilogramm (€159.60 / 1 Kilogramm)
Griffon Kolmat® Tube 300g
Sealing paste for sealing metal threaded connections. Field of application For sealing metal threaded connections in, e.g., (drinking) water, central heating, gas, and compressed air systems. Use in combination with Kolmat® hemp or acrylic fiber. Gas: -20°C to +70°C, up to 5 bar. Water: 95°C, up to 16 bar; 130°C, up to 7 bar. Not suitable for oxygen. Properties Resistant to high temperature variations Not affected by gas and water Re-adjustable (does not cure) Removable Corrosion retardant
Content: 0.3 Kilogramm (€21.03 / 1 Kilogramm)
Griffon Konstru Max Express beige cartridge 380g
High-strength construction adhesive based on SMP – free of solvents and MDI (methylene diphenyl diisocyanate). Ideal for structural bonding between various materials and general applications where high mechanical strengths are required. Suitable for use indoors and outdoors. Application Areas Suitable for applications where gap-filling properties are required, such as on uneven surfaces (stone, concrete, etc.) e.g., in house & interior construction, but also ideal for well-fitting surfaces and small gap widths, e.g., mounting large-format cladding, panels, laminations, etc. Suitable for mounting wall caps, bonding gypsum fiber boards, or constructions with cement-bonded rigid foam boards. Shows excellent adhesion to various materials, e.g., mineral building materials like (natural) stone, (aerated) concrete, gypsum, etc., metals, woods and wood-based materials, glass, rigid foams, and various plastics. Not suitable for PE, PP, PTFE, and PA (Nylon). Properties One-component and easy to process Shows excellent adhesion to various materials Fast-curing: hand-tight (10 kg/cm²) after approx. 30 min* Very high final strength; up to 110 kg/cm2 High mechanical hardness (95 Shore-A), but compensates for certain material tensions Gap-filling up to approx. 4 mm and non-foaming Water & weather resistant (D4 according to EN 204) and therefore also suitable for outdoor use or areas with increased humidity Temperature resistant from -40 °C to +120 °C Paintable (test beforehand) and sandable after curing *Depending on the amount of adhesive applied, ambient & component moisture and temperature **Tested according to EN 204: Beech wood to beech wood
Content: 0.38 Kilogramm (€31.79 / 1 Kilogramm)
Griffon Max Repair Extreme Tube Infocard 20g
Max Repair Extreme offers an unparalleled solution for handling extreme repair challenges. It is characterized by its exceptional strength, elasticity, water resistance, and filling properties. Field of application Max Repair Extreme is designed for repairing a wide range of porous and non-porous materials, including wood, textile, leather, cork, metal, glass, plastic, rubber, ceramic tiles, stone, cement, and many others. It is suitable for both indoor and outdoor applications. Max Repair Extreme utilizes GRIFFON Polymer Technology, ensuring a universal, strong, flexible, long-lasting, safe, and user-friendly solution for everyday repair needs. Not recommended for use with Polypropylene (PP), Polyethylene (PE), and P.T.F.E. Properties Extremely strong Exceptionally flexible Water resistant Capable of filling gaps Dishwasher-safe Resistant to shock and vibrations Temperature resistant UV resistant Solvent free Transparent
Content: 0.02 Kilogramm (€346.00 / 1 Kilogramm)
Griffon multi-tool blister card
This tool is designed for opening cartridges, cutting nozzles, and applying and/or removing sealants. Field of application It's suitable for use with all types of sealants, including Silicone Sealants (S-100 and S-200), Acrylic Sealants (A-100), and Poly Max®. Properties Multi-functional Simple to use Ergonomic
Griffon Panel Max Direct Power, Cartridge 425g
Assembly adhesive based on hybrid polymer with very high initial adhesion for the installation of panels, wall cladding, and facings on almost all surfaces. Ideal for all panels that are not fully bonded, such as acoustic panels or decorative panels. Application areas All types of panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane, or PVC. Not suitable for PE, PP, PTFE, and bitumen. *Adhesion tests are recommended, as the rear coating may have different properties depending on the manufacturer. Properties Suitable for practically all types of panels Ideal for heavy panels Very high initial adhesion Easy to apply Stress compensating Moisture/water resistant Very good filling capacity Temperature resistant between -40°C and +100°C Paintable
Content: 0.425 Kilogramm (€27.98 / 1 Kilogramm)
Griffon Panel Max Full Surface, Cartridge 465g
Assembly adhesive based on hybrid polymer for the installation of panels, wall cladding, and facings on almost all surfaces. Ideal also for all panels that are fully or extensively bonded, such as wall cladding in damp rooms or smaller panels with click or tongue-and-groove connections. Application areas All types of panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane, or PVC. Not suitable for PE, PP, PTFE, and bitumen. *Adhesion tests are recommended, as the rear coating may have different properties depending on the manufacturer. Properties Suitable for almost all types of panels Very easy to apply Very easy to spread with a notched trowel Stress compensating Moisture/water resistant Good filling capacity Temperature resistant between -40°C and +100°C Paintable
Content: 0.465 Kilogramm (€25.57 / 1 Kilogramm)
Griffon Poly Max® Fix & Seal Express white cartridge 425g
Solvent-free assembly adhesive and sealant based on SMP Polymer with very high elasticity and very fast strength gain. Ideal for fixing and sealing at the same time. Field of application For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. Suitable for internal and external applications, such as timber framework, skirting boards, laths, window sills, sheet, and insulation materials. Also suitable for sealing joints, seams, and cracks in (synthetic) window frames, roof fascia, roofs, gutters, walls, skylights, and chimneys. For all professional applications including wall and interior construction, house, utility, and bodywork building. Not suitable for PE, PP, PTFE, pure plaster, and bitumen. When gluing plastics, always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties: Very high, permanent elasticity Very fast strength gain Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing ca. 2 mm/24 hours Mildew resistant
Content: 0.425 Kilogramm (€25.34 / 1 Kilogramm)
Griffon Poly Max® High Tack Express white cartridge 435g
This solvent-free assembly adhesive is based on SMP-Polymer, offering very high initial bond strength and rapid strength gain. It is particularly suitable for heavy materials. Field of application Ideal for bonding and fixing a variety of construction materials on almost any surface, including wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. In drywall construction, it is used for bonding and fixing UW rails in floor, ceiling, and wall areas. Suitable for both internal and external applications, such as panels, ceiling elements, roof fascias, plasterboard, panelling, insulation material, mirrors, timber framework, skirting boards, and laths. Suitable for professional applications in wall and interior construction, house, utility, and bodywork building. Not suitable for PE, PP, PTFE, gypsum, and bitumen. When gluing plastics, always perform an adhesion test first as adhesion may vary depending on the type and quality of the plastic. Properties Very high initial bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing approximately 1.6 mm/24 hours
Content: 0.435 Kilogramm (€27.33 / 1 Kilogramm)
Griffon Poly Max® High Tack Express white Sausage 600ml/900g
Solvent-free assembly adhesive based on SMP-Polymer with very high initial bond strength and very fast strength gain. Excellent for heavy materials. Field of application For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. Suitable for internal and external applications, such as panels, ceiling elements, roof fascias, panelling and insulation material, mirrors, timber framework, skirting boards, and laths. For all professional applications including wall and interior construction, house, utility, and bodywork building. Not suitable for: PE, PP, PTFE, pure plaster, and bitumen. When gluing plastics, always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties Very high initial bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing ca. 1.6 mm/24 hours
Content: 0.9 Kilogramm (€23.31 / 1 Kilogramm)
Griffon Poly Max® High Tack V-nozzle (6pcs) for sausage packaging
Nozzle with special V-opening for processing Poly Max® High Tack Express in sausage packaging. For use in combination with Poly Max® Sausage Gun. Field of application Tool for processing Poly Max® High Tack Express in sausage packaging. Properties Nozzle with V-opening for applying an optimal adhesive strip: for perfect even distribution of the adhesive for an extra high initial bond strength
Content: 10 Stück (€0.29 / 1 Stück)
Griffon Poly Max® Pro Power Express transparent cartridge 300g
Solvent-free assembly adhesive with very high final bond strength and very fast strength gain on the basis of SMP Polymer. Field of application For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam and various plastics. Suitable for internal and external applications, such as timber framework, skirting boards, laths, window sills and sheet and insulation material. For all professional applications including wall and interior construction, house, utility and bodywork building. Not suitable for: PE, PP, PTFE, pure plaster, and bitumen. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties Very high final bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing ca. 2 mm/24 hours
Content: 0.3 Kilogramm (€39.63 / 1 Kilogramm)
Griffon Poly Max® Pro Power Express White Cartridge 435g
Solvent-free assembly adhesive with very high final bond strength and very fast strength gain on the basis of SMP Polymer. Field of application For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. Suitable for internal and external applications, such as timber framework, skirting boards, laths, window sills, and sheet and insulation material. For all professional applications including wall and interior construction, house, utility, and bodywork building. Not suitable for PE, PP, PTFE, pure plaster, and bitumen. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties Very high final bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing approximately 2 mm/24 hours
Content: 0.435 Kilogramm (€25.95 / 1 Kilogramm)
Griffon Poly Max® Sausage Gun
Professional sausage gun. Field of application For applying Poly Max® and other types of adhesives and sealants in sausage packaging, up to and including 600 ml. And with small adjustments, suitable for processing all types of adhesives and sealants in cartridges. Properties Durable system Direct-stop function Non-drip system Easy visibility strip on top 360º rotation Exact dosage Ladder hook
Griffon PTFE tape DIN-EN roll 12m x 12mm x 0.10mm
PTFE tape for sealing metal and synthetic threaded connections. Field of application For sealing metal and synthetic threaded connections. Suitable for gas, water, oxygen, steam, fuels, solvents, and acids. For gas: Maximum operating pressure 0.2 bar at an ambient temperature of -20°C to 135°C. Not suitable for gas (Netherlands). Properties: 100% PTFE Chemical resistant Mould resistant UV resistant Removable Immediately loadable
Content: 12 lfd. Meter (€0.10 / 1 lfd. Meter)
Griffon PTFE tape roll 12m x 12mm x 0.076mm
This PTFE tape is optimally suited for sealing metal and plastic threaded connections. Application Areas It is versatile and suitable for water, oxygen, steam, fuels, solvents, and acids. However, it is not suitable for use with gas. Properties Made of 100% PTFE for optimal sealing Resistant to chemicals and UV light for long-lasting durability Mold-resistant to prevent unwanted deposits Removable for easy handling and adjustment Immediately loadable to save time and achieve quick results
Content: 12 lfd. Meter (€0.05 / 1 lfd. Meter)
Griffon PU wood adhesive Fibre D4 bottle 750g
Fibre-reinforced, fast, liquid, waterproof, limited filling, 1-component wood adhesive based on polyurethane. Field of application For waterproof (D4) mutual (surface) bonding of practically all types of wood as well as bonding practically all types of wood to many building materials, such as gypsum, (natural) stone, (cellular) concrete, metal, hard foam, and various synthetics. Suitable for non-load bearing wooden structures using various wood joints such as finger joints, dovetail joints, mortise and tenon joints, dowels, and springs. Suitable for interior and exterior applications, such as façade carpentry and sandwich panels. Also for less-fitting joints (for example, unplaned wood). The adhesive cures under the influence of moisture. Because of this, at least one of both surfaces needs to be a porous, moisture-containing surface. D4: Interiors where flowing water or condensation are present over long periods on a regular basis. Exteriors exposed to the influences of the weather, providing effective protection for bonded wood. Not suitable for Polyethyleen (PE), polypropyleen (PP), PTFE en nylon (PA). Properties Fibre-reinforced Fast Liquid Limited filling; effervescing All-weather resistant Solvent-free Paintable Sandable
Content: 0.75 Kilogramm (€28.81 / 1 Kilogramm)
Griffon PU-Tix Fiber D4 cartridge 340g
Fibre-reinforced, very fast, thixotropic, waterproof, limited filling, 1-component wood adhesive based on polyurethane. Field of application For waterproof (D4) mutual (surface) bonding of practically all types of wood as well as bonding practically all types of wood to many building materials, such as gypsum, (natural) stone, (cellular) concrete, metal, hard foam and various synthetics. Suitable for non-bearing wood structures using various wood joints such as finger joints, dovetail joints, mortise and tenon joints, dowels and springs. Suitable for interior and exterior applications, such as façade carpentry and sandwich panels. Also for less-fitting joints (for example, unplaned wood). Ideal for vertical applications. The adhesive cures under the influence of moisture. Because of this, at least one of both surfaces needs to be a porous, moisture-containing surface. D4: Interiors where flowing water or condensation are present over long periods on a regular basis. Exteriors exposed to the influences of the weather, providing effective protection for bonded wood. Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and nylon (PA). Properties Fibre-reinforced Very fast Fast curing to the core Limited filling; slightly effervescing Good standing power; does not drip Solvent-free All-weather resistant Paintable Sandable Thixotropic
Content: 0.34 Kilogramm (€39.12 / 1 Kilogramm)
Griffon Sealant Finisher 500ml
Acid-free smoothing agent for quick and easy finishing of all types of sealants. Field of application Suitable for fast and easy finishing of all types of sealants. Properties Simple to dose evenly Can be used in all positions
Content: 0.5 Liter (€17.20 / 1 Liter)