Griffon Panel Max Full Surface, Cartridge 465g

Notched trowel with wooden handle for the optimal application of various adhesives on large surfaces. Application areas For large-scale application and distribution of adhesives, glues, or liquid coatings. Properties Rectangular notching with 3 x 3 mm, 3 mm tooth spacing Corresponds to notching "C3" according to TKB Ideal for large surface bonding Allows for consistent layer thicknesses Sturdy metal construction

Special nozzle with four individually cuttable outlets and a practical side guide pin. Ideally suited for the application of GRIFFON PANEL MAX assembly adhesives. Application areas Nozzle for the application of up to four thin, parallel adhesive beads on various surfaces. Ideal for larger areas and applications where adhesive or sealant needs to be applied along longer edges, such as when bonding panels, skirting boards, or trim strips. Properties Number and position of the outlets can be selected according to requirements The distance between the individual outlets is 20 mm and between the guide pin and the first outlet is 10 mm; the total width of the nozzle is about 80 mm The removable guide pin allows for particularly precise and efficient application along edges Compatible with all 1K cartridges with S15 standard coarse thread

Assembly adhesive based on hybrid polymer with very high initial adhesion for the installation of panels, wall cladding, and facings on almost all surfaces. Ideal for all panels that are not fully bonded, such as acoustic panels or decorative panels. Application areas All types of panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane, or PVC. Not suitable for PE, PP, PTFE, and bitumen. *Adhesion tests are recommended, as the rear coating may have different properties depending on the manufacturer. Properties Suitable for practically all types of panels Ideal for heavy panels Very high initial adhesion Easy to apply Stress compensating Moisture/water resistant Very good filling capacity Temperature resistant between -40°C and +100°C Paintable

This professional cartridge gun is designed for precise and efficient application of various types of adhesives and sealants. Field of application It is suitable for processing all types of adhesives and sealants contained in cartridges, including silicone sealants, MS-polymers, Montagekits, PU construction adhesives, and acrylic sealants. Properties Direct-stop function to prevent excess flow when releasing the trigger Non-drip system for clean and controlled application 360º rotation for enhanced maneuverability and accessibility Exact dosage for precise application Robust metal housing for durability and longevity Ladder Hook for convenient storage and accessibility at elevated work areas