Assembly adhesive based on hybrid polymer with very high initial adhesion for the installation of panels, wall cladding, and facings on almost all surfaces. Ideal for all panels that are not fully bonded, such as acoustic panels or decorative panels. Application areas All types of panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane, or PVC. Not suitable for PE, PP, PTFE, and bitumen. *Adhesion tests are recommended, as the rear coating may have different properties depending on the manufacturer. Properties Suitable for practically all types of panels Ideal for heavy panels Very high initial adhesion Easy to apply Stress compensating Moisture/water resistant Very good filling capacity Temperature resistant between -40°C and +100°C Paintable

Assembly adhesive based on hybrid polymer for the installation of panels, wall cladding, and facings on almost all surfaces. Ideal also for all panels that are fully or extensively bonded, such as wall cladding in damp rooms or smaller panels with click or tongue-and-groove connections. Application areas All types of panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane, or PVC. Not suitable for PE, PP, PTFE, and bitumen. *Adhesion tests are recommended, as the rear coating may have different properties depending on the manufacturer. Properties Suitable for almost all types of panels Very easy to apply Very easy to spread with a notched trowel Stress compensating Moisture/water resistant Good filling capacity Temperature resistant between -40°C and +100°C Paintable

Special nozzle with four individually cuttable outlets and a practical side guide pin. Ideally suited for the application of GRIFFON PANEL MAX assembly adhesives. Application areas Nozzle for the application of up to four thin, parallel adhesive beads on various surfaces. Ideal for larger areas and applications where adhesive or sealant needs to be applied along longer edges, such as when bonding panels, skirting boards, or trim strips. Properties Number and position of the outlets can be selected according to requirements The distance between the individual outlets is 20 mm and between the guide pin and the first outlet is 10 mm; the total width of the nozzle is about 80 mm The removable guide pin allows for particularly precise and efficient application along edges Compatible with all 1K cartridges with S15 standard coarse thread

Notched trowel with wooden handle for the optimal application of various adhesives on large surfaces. Application areas For large-scale application and distribution of adhesives, glues, or liquid coatings. Properties Rectangular notching with 3 x 3 mm, 3 mm tooth spacing Corresponds to notching "C3" according to TKB Ideal for large surface bonding Allows for consistent layer thicknesses Sturdy metal construction

This solvent-free assembly adhesive is based on SMP-Polymer, offering very high initial bond strength and rapid strength gain. It is particularly suitable for heavy materials. Field of application Ideal for bonding and fixing a variety of construction materials on almost any surface, including wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. In drywall construction, it is used for bonding and fixing UW rails in floor, ceiling, and wall areas. Suitable for both internal and external applications, such as panels, ceiling elements, roof fascias, plasterboard, panelling, insulation material, mirrors, timber framework, skirting boards, and laths. Suitable for professional applications in wall and interior construction, house, utility, and bodywork building. Not suitable for PE, PP, PTFE, gypsum, and bitumen. When gluing plastics, always perform an adhesion test first as adhesion may vary depending on the type and quality of the plastic. Properties Very high initial bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing approximately 1.6 mm/24 hours

Solvent-free assembly adhesive based on SMP-Polymer with very high initial bond strength and very fast strength gain. Excellent for heavy materials. Field of application For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. Drywall construction: Bonding/fixing of UW rails in floor, ceiling, and wall areas. Suitable for internal and external applications, such as panels, ceiling elements, roof fascias, plasterboard, panelling, and insulation material, mirrors, timber framework, skirting boards, and laths. For all professional applications including wall and interior construction, house, utility, and bodywork building. Not suitable for PE, PP, PTFE, gypsum, and bitumen. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties Very high initial bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing approximately 1.6 mm/24 hours

Solvent-free assembly adhesive based on SMP-Polymer with very high initial bond strength and very fast strength gain. Excellent for heavy materials. Field of application For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam, and various plastics. Suitable for internal and external applications, such as panels, ceiling elements, roof fascias, panelling and insulation material, mirrors, timber framework, skirting boards, and laths. For all professional applications including wall and interior construction, house, utility, and bodywork building. Not suitable for: PE, PP, PTFE, pure plaster, and bitumen. When gluing plastics, always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic. Properties Very high initial bond strength Very fast strength gain Permanently elastic Very good filling capacity Good standing power Non-shrinking, 100% adhesive Solvent-free No soiling of joint edges All-weather resistant Resistant to temperatures between -40°C and +100°C Paintable Curing ca. 1.6 mm/24 hours

Nozzle with special V-opening for processing Poly Max® High Tack Express in sausage packaging. For use in combination with Poly Max® Sausage Gun. Field of application Tool for processing Poly Max® High Tack Express in sausage packaging. Properties Nozzle with V-opening for applying an optimal adhesive strip: for perfect even distribution of the adhesive for an extra high initial bond strength

A versatile, durable, waterproof, airtight, and protective coating. Field of application Ideal for sealing and protecting a wide variety of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (pre-test recommended), etc. Suitable for floors, partitions, walls, seams, joints, conduits, and structural components. Excellent for both interior and exterior applications such as bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, terraces, etc. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion Easy to apply All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based

Discover a versatile, durable, waterproof, airtight, and protective coating. Field of application This coating is perfect for sealing and safeguarding a wide range of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (pre-test recommended). It's suitable for floors, partitions, walls, seams, joints, conduits, and structural components. Whether you're working on interior or exterior projects such as bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, or ground level items, this coating has you covered. It's also ideal as a waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, terraces, and more. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion Easy to apply All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based

The HBS-200® Rubber Tix is a universal, thixotropic, and durable coating designed to provide waterproof, airtight, and protective properties. Its high viscosity makes it ideal for vertical applications and enables fast layer build-up. Field of application This coating is suitable for sealing and protecting a wide variety of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (testing is recommended before application). It can be used for various purposes such as floors, partitions, walls, seams, joints, conduits, and structural components. It is equally effective for both interior and exterior applications, including bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Additionally, it serves as an ideal waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, and terraces. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Easy to apply, ideal for vertical applications and faster layer build-up Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic

Elastic waterproof and airtight coating based on innovative SMP-technology. Field of application Designed for sealing, protecting, and repairing roofs, walls, cracks, joints, ducts, and connections. This coating exhibits excellent adhesion (without primer) on a wide variety of materials, including concrete, metal, stone, wood, zinc, PVC, and EPDM (test in advance). It can be applied on both horizontal and vertical surfaces, making it suitable for indoor and outdoor applications such as sealing ducts, floor seals, expansion joints, wall-window frame connections, and below-ground level structures. Additionally, it is suitable for waterproofing under tiles in wet rooms and swimming pools. Perfect for achieving airtight sealing of the building envelope. Airtightness has been tested according to EN 12114 and EN 1026. Not suitable for PE, PP, PTFE, and non-treated Bitumen. Properties Waterproof & airtight Excellent adhesion on many surfaces (without primer) Can be applied on moist surfaces Weather & UV resistant Chlorine and salt water resistant Self-levelling Non-shrinking Permanently elastic (>250%) Paintable and plasterable Free of bitumen, isocyanates, and solvents

Premium waterproof and airtight elastic coating based on innovative polymer technology. Field of application Designed for waterproofing cracks in roofs (repair), dome windows, pipe transits, and other building components. Suitable for horizontal and vertical applications, it effectively seals and protects a wide variety of materials, such as concrete, metal, stone, wood, zinc, PVC, and EPDM (always test in advance). Ideal for both interior and exterior applications including basements, terraces, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer below tiles in damp environments like bathrooms and swimming pools. Perfect for airtight sealing of the building envelope from both the outside and inside, meeting airtightness requirements according to EN 12114 and EN 1026. Properties 100% waterproof & airtight Can be applied on moist surfaces Superior adhesion Weather & UV resistant Suitable for all (construction) materials & surfaces Does not shrink & self-leveling Permanent elasticity (>250%) Indoor & outdoor use Ready to use Easy to apply with brush, roller, or spatula Paintable & plasterable Protects metals from corrosion Resistance to chlorine and salt water Free of bitumen, isocyanates, and solvents

Premium waterproof and airtight elastic coating based on innovative polymer technology. Field of application Ideal for waterproofing cracks in roofs (repair), dome windows, pipe transits, and other building components. Suitable for horizontal and vertical applications, this coating effectively seals and protects a wide variety of materials, including concrete, metal, stone, wood, zinc, PVC, and EPDM (always test in advance). Excellent for both interior and exterior applications, such as basements, terraces, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer in damp environments like bathrooms and swimming pools. Perfect for airtight sealing of the building envelope from the outside and inside. Meets airtightness requirements according to EN 12114 and EN 1026. Properties 100% waterproof & airtight Can be applied on moist surfaces Superior adhesion Weather & UV resistant Suitable for all construction materials & surfaces Does not shrink Permanent elasticity (>250%) Indoor & outdoor use Ready to use Easy application with cartridge gun Paintable & plasterable Protects metals from corrosion Resistance to chlorine and salt water Free of bitumen, isocyanates, and solvents

Thixotropic, THF-free rigid PVC cement. Field of application For joining pipes, sockets and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. With special pipe brush for quick and easy application. Suitable for diameters ≤ 400 mm. Max. 16 bar (PN 16). Maximal tolerances 0.6 mm diametrical clearance / 0.2 mm press fit. Suitable for e.g. pipe systems conforming to EN 1329, 1452, 1453, 1455 and ISO 15493 (PVC). Properties: THF-free Thixotropic Gap filling

Thixotropic, THF-free rigid PVC cement. Field of application For joining pipes, sockets and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. With special pipe brush for quick and easy application. Suitable for diameters ≤ 400 mm. Max. 16 bar (PN 16). Maximal tolerances 0.6 mm diametrical clearance / 0.2 mm press fit. Suitable for e.g. pipe systems conforming to EN 1329, 1452, 1453, 1455 and ISO 15493 (PVC). Properties: THF-free Thixotropic Gap filling

Fast, thixotropic rigid PVC cement. Field of application For joining pipes, sockets, and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Comes with a special pipe brush for quick and easy application. Suitable for diameters up to 315 mm. Maximum pressure of 16 bar (PN 16). Maximum tolerances of 0.8 mm diametrical clearance / 0.2 mm press fit. Suitable for pipe systems conforming to EN 1329, 1452, 1453, 1455, and ISO 15493 (PVC). Properties: Fast Thixotropic Gap filling

Fast, thixotropic rigid PVC cement. Field of application For joining pipes, sockets, and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. With a special pipe brush for quick and easy application. Suitable for diameters up to 315 mm. Maximum pressure of 16 bar (PN 16). Maximum tolerances of 0.8 mm diametrical clearance and 0.2 mm press fit. Suitable for pipe systems conforming to EN 1329, 1452, 1453, 1455, and ISO 15493 (PVC). Properties: Fast Thixotropic Gap filling

Thixotropic rigid PVC cement. Field of application For joining pipes, sockets, and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Extremely suitable for large diameters and at higher temperatures (> 35°C). Suitable for diameters up to 800 mm. Maximum pressure of 16 bar (PN 16). Maximum tolerances of 0.8 mm diametrical clearance and 0.2 mm press fit. Suitable for pipe systems conforming to EN 1329, 1452, 1453, 1455, and ISO 15493 (PVC). Properties: Extended open time Thixotropic Gap filling

Fast, thixotropic rigid PVC cement. Field of application For joining pipes, sockets, and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Suitable for diameters up to 315 mm. Maximum pressure of 16 bar (PN 16). Maximum tolerances of 0.8 mm diametrical clearance and 0.2 mm press fit. Suitable for pipe systems conforming to EN 1329, 1452, 1453, 1455, and ISO 15493 (PVC). Properties: Fast Thixotropic Gap filling

Thixotropic, THF-free rigid PVC cement. Field of application For joining pipes, sockets, and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Suitable for diameters ≤ 400 mm. Max. 16 bar (PN 16). Maximal tolerances 0.6 mm diametrical clearance / 0.2 mm press fit. Suitable for pipe systems conforming to EN 1329, 1452, 1453, 1455, and ISO 15493 (PVC). Properties: THF-free Thixotropic Gap filling