Griffon Coatings
Griffon FLEXFOAM-200 750ml
Professional and permanently elastic single-component gun foam based on polyurethane. Ideal for making airtight seals, optionally in combination with other GRIFFON HBS-200® products. Quick and easy application with the GRIFFON PU Foam Gun. Because the foam remains flexible, it is easy to make permanent, insulated seals between two (significantly) moving surfaces. Field of application Suitable for sealing and insulating, as well as filling seams, pointing, holes, cracks and gaps and making joints to prevent air and heat loss, draughts, noise and damp. This includes joints between partition walls and ceilings, between walls, clearance spaces between window or door frames and the wall, ridge seams, roof decking, chimneys and roof panels, pipe ducts, sleeving, cables and electrical conduits. Adheres to many building materials including wood, concrete, stone, brickwork, plasterwork, metals, glass and many plastics including polystyrene, polyester and PVC. Not suitable for polyethylene, polypropylene, polymethyl methacrylate and polytetrafluoroethylene. Properties Airtight, tested to 1,050 Pa Remains elastic (25%) Excellent sound insulation Low subsequent expansion, minimum cutting loss Paint and stucco finishing Water resistant Resistant to chemicals Temperature resistant from -40°C to +90°C ± 70% closed cells
Content: 0.75 Liter (€19.64 / 1 Liter)
Griffon HBS-200 Liquid Rubber Brush 40mm
Universal flat brush, suitable for the application of HBS-200 Liquid Rubber, among others. Field of application Suitable for the application of HBS-200 Liquid Rubber and P-01 Surface Primer, among others. Properties Good absorption and distribution of HBS-200 Liquid Rubber, among others Ergonomic Flat, 40 mm
Griffon HBS-200® Accelerator refill canister 5l
The HBS-200® Accelerator is a spray designed to expedite the drying process of the top layer of HBS-200® coatings. It ensures waterproofing just 10 minutes after application, making it particularly suitable for use in turbulent weather conditions. Field of application To be used specifically with HBS-200® Liquid Rubber and HBS-200® Rubber Tix. Properties The accelerator does not compromise the technical properties of HBS-200® Liquid Rubber and HBS-200® Rubber Tix.
Content: 5 Liter (€9.06 / 1 Liter)
Griffon HBS-200® Accelerator spray bottle 1l
The HBS-200® Accelerator is a spray designed to expedite the drying process of the top layer of HBS-200® coatings. It ensures waterproofing just 10 minutes after application, making it particularly suitable for use in turbulent weather conditions. Field of application This accelerator is intended for use specifically with HBS-200® Liquid Rubber and HBS-200® Rubber Tix. Properties The accelerator does not compromise the technical properties of HBS-200® Liquid Rubber and HBS-200® Rubber Tix.
Griffon HBS-200® GeoTextile roll 15cm x 20m
Elastic cloth designed for use in combination with HBS-200® Liquid Rubber. Field of application Perfectly suited for use alongside HBS-200® Liquid Rubber in scenarios requiring seam, crack, and tear-bridging applications. Ideal for sealing and safeguarding a diverse range of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (test first). Suitable for various applications such as floors, partitions, walls, seams, joints, conduits, and structural components. Highly effective for both indoor and outdoor use, encompassing areas like bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground-level items. Additionally, it serves as a reliable waterproof layer beneath tiles in damp environments like bathrooms, swimming pools, balconies, and terraces. Properties Elastic Provides excellent absorption of HBS-200® Liquid Rubber Strong Non-woven
Content: 20 lfd. Meter (€0.54 / 1 lfd. Meter)
Griffon HBS-200® GeoTextile roll 30cm x 20m
Elastic cloth for use in combination with HBS-200® Liquid Rubber. Field of application Suitable for use in combination with HBS-200® Liquid Rubber in case of seam, crack, and tear-bridging applications. Suitable for sealing and protecting a wide variety of materials, such as concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (test first), etc. For floors, partitions, walls, seams, joints, conduits, and structural components. Excellent for both interior and exterior applications (bathrooms, cellars, balconies, roofs, etc.) including gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer under tiles in damp environments, such as bathrooms, swimming pools, balconies, terraces, etc. Properties Elastic Excellent absorption of HBS-200® Liquid Rubber Strong Non-woven
Content: 20 lfd. Meter (€1.06 / 1 lfd. Meter)
Griffon HBS-200® Liquid Rubber Bucket 16l
A versatile, long-lasting, waterproof, airtight, and protective coating. Field of application Ideal for sealing and protecting a diverse range of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (pre-test recommended), and more. Suitable for various applications such as floors, partitions, walls, seams, joints, conduits, and structural components. Excellent for both indoor and outdoor use, including bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground-level installations. Also effective as a waterproof layer beneath tiles in damp environments like bathrooms, swimming pools, balconies, and terraces. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion Easy to apply All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based
Content: 16 Liter (€18.68 / 1 Liter)
Griffon HBS-200® Liquid Rubber Bucket 1l
Discover a versatile, durable, waterproof, airtight, and protective coating. Field of application This coating is perfect for sealing and safeguarding a wide range of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (pre-test recommended). It's suitable for floors, partitions, walls, seams, joints, conduits, and structural components. Whether you're working on interior or exterior projects such as bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, or ground level items, this coating has you covered. It's also ideal as a waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, terraces, and more. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion Easy to apply All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based
Griffon HBS-200® Liquid Rubber Bucket 5l
A versatile, durable, waterproof, airtight, and protective coating. Field of application Ideal for sealing and protecting a wide variety of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (pre-test recommended), etc. Suitable for floors, partitions, walls, seams, joints, conduits, and structural components. Excellent for both interior and exterior applications such as bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, terraces, etc. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion Easy to apply All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based
Content: 5 Liter (€19.71 / 1 Liter)
Griffon HBS-200® Rubber Tix bucket 16l
The HBS-200® Rubber Tix is a universal, thixotropic, and durable coating designed to provide waterproof, airtight, and protective properties. Field of application It is suitable for sealing and protecting a wide variety of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (test first). Ideal for floors, partitions, walls, seams, joints, conduits, and structural components, it can be used both indoors and outdoors, in areas such as bathrooms, cellars, balconies, and roofs. Additionally, it is suitable for sealing gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Its high viscosity makes it perfect for vertical applications, and it can serve as a waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, and terraces. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Easy to apply, ideal for vertical applications and faster layer build-up Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic
Content: 16 Liter (€18.68 / 1 Liter)
Griffon HBS-200® Rubber Tix bucket 1l
The HBS-200® Rubber Tix is a universal, thixotropic, and durable coating designed to provide waterproof, airtight, and protective properties. Its high viscosity makes it ideal for vertical applications and enables fast layer build-up. Field of application This coating is suitable for sealing and protecting a wide variety of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (testing is recommended before application). It can be used for various purposes such as floors, partitions, walls, seams, joints, conduits, and structural components. It is equally effective for both interior and exterior applications, including bathrooms, cellars, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Additionally, it serves as an ideal waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, and terraces. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Easy to apply, ideal for vertical applications and faster layer build-up Durable quality: minimum 20 years of durability (tested according to EN 1297) Protects against corrosion and erosion All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic
Griffon HBS-200® Rubber Tix bucket 5l
HBS-200® Rubber Tix is a universal, thixotropic, durable, waterproof, airtight, and protective coating. Its high viscosity makes it ideal for vertical applications and rapid layer build-up. Field of application It is suitable for sealing and protecting a wide variety of materials, including concrete, metal, stone, wood, bitumen, zinc, PVC, and EPDM (test first). Perfect for floors, partitions, walls, seams, joints, conduits, and structural components. Ideal for both interior and exterior applications such as bathrooms, cellars, balconies, and roofs. It can be used for gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground-level items. Especially suitable for vertical application on walls and partitions. Additionally, it serves as a waterproof layer under tiles in damp environments like bathrooms, swimming pools, balconies, and terraces. Properties Waterproof and airtight Very high level of permanent elasticity (900%) Excellent bonding to many substrates Easy to apply, ideal for vertical applications and faster layer build-up Durable quality: minimum durability of 20 years (tested according to EN 1297) Protects against corrosion and erosion All-weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based
Content: 5 Liter (€19.71 / 1 Liter)
Griffon HBS-200® Rubber Tix cartridge 310g
Universal, permanent, water and airtight, protective sealing agent. Field of application For sealing many types of materials including concrete, metal, stone, wood, bitumen, zinc, PVC, etc. Excellent for both interior and exterior applications (bathrooms, cellars, balconies, roofs, etc.) including gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints and ground level items. Properties Waterproof and airtight High level of permanent elasticity (900%) Excellent adhesion on many surfaces Protects against corrosion and erosion Easy to apply Durable quality: durability of minimum 20 years (tested conform EN 1297) Weather and UV resistant Salt and chemical resistant Paintable Solvent-free VOC-free Non-toxic Water-based
Content: 0.31 Kilogramm (€19.52 / 1 Kilogramm)
Griffon HBS-200® Tape roll 20cm x 10m
This universally applicable, elastic, waterproof and airtight bitumen adhesive tape is ideal for (emergency) repairs. It can also be used in combination with the liquid HBS-200® Liquid Rubber to bridge large seams, gaps, and cracks and to build up thickness. Application Area Suitable for (emergency) repairs and also suitable for bridging large seams, gaps, and cracks and building up thickness. Features Excellent adhesive strength on virtually all materials such as wood, concrete, stone, metal, zinc, bitumen, EPDM (pre-test), PVC, etc. (good adhesive strength on polypropylene and polyethylene) Excellent compatibility with HBS-200® Liquid Rubber High elasticity High bridging capability High adhesive strength Immediately waterproof (ideal for emergency repairs) No curing/waiting time - immediately rainproof Easy to apply Temperature resistant from -25°C to +70°C
Content: 10 lfd. Meter (€3.71 / 1 lfd. Meter)
Griffon HBS-200® Tape roll 7.5cm x 5m
Universally applicable, elastic, waterproof, and airtight bitumen tape for (emergency) repairs. Also suitable for use in combination with the liquid HBS-200® Liquid Rubber to bridge large seams, gaps, and cracks and to build up thickness. Field of application Suitable for (emergency) repairs. Also suitable for bridging large seams, gaps, and cracks and for building up thickness. Properties Excellent adhesive strength on virtually all materials such as wood, concrete, stone, metal, zinc, bitumen, EPDM (test beforehand), PVC, etc. (good adhesive strength on polypropylene and polyethylene) Excellent compatibility with HBS-200® Liquid Rubber High elasticity High bridging ability High adhesive force Immediately waterproof (ideal for emergency repairs) No curing/waiting time - directly rain resistant Easy to apply Temperature resistant from -25°C to +70°C
Content: 0.308 Liter (€28.18 / 1 Liter)
Griffon IPS-300 can 5l
The treated surface becomes water and dirt proof, does not change color, and remains vapor permeable. It provides 10 years of protection against rain penetration and pollution, improving the insulation capacity, which leads to energy savings. Field of application Designed for absorbent and porous, mineral surfaces such as facades, masonry, paving, terraces, and pool copings (brick, concrete, sand-lime brick, sandstone, limestone, porous natural stone, and tiles). Properties Water- and dirt-proof Vapour permeable UV resistant Doesn’t affect surface color Hydrophobic technology Durable effect: 10 years protection
Content: 5 Liter (€5.39 / 1 Liter)
Griffon SMP-300® grey bucket 14kg
Elastic waterproof and airtight coating based on innovative SMP-technology. Field of application Designed for sealing, protecting, and repairing roofs, walls, cracks, joints, ducts, and connections. This coating offers excellent adhesion (without primer) on a wide variety of materials, such as concrete, metal, stone, wood, zinc, PVC, and EPDM (test in advance). Can be applied on horizontal and vertical surfaces and suitable for indoor and outdoor applications, such as sealing ducts, floor seals, expansions joints, wall-window frame connections, and below-ground-level structures. Also suitable for waterproofing under tiles in wet rooms and swimming pools. Perfect for airtight sealing of the building envelope. Airtightness has been tested according to EN 12114 and EN 1026. Not suitable for PE, PP, PTFE, and non-treated Bitumen. Properties Waterproof & airtight Excellent adhesion on many surfaces (without primer) Can be applied on moist surfaces Weather & UV resistant Chlorine and salt water resistant Self-levelling Non-shrinking Permanently elastic (>250%) Paintable and plasterable Free of bitumen, isocyanates, and solvents
Content: 14 Kilogramm (€12.21 / 1 Kilogramm)
Griffon SMP-300® grey bucket 7kg
Elastic waterproof and airtight coating based on innovative SMP-technology. Field of application Designed for sealing, protecting, and repairing roofs, walls, cracks, joints, ducts, and connections. This coating offers excellent adhesion (without primer) on a wide variety of materials, including concrete, metal, stone, wood, zinc, PVC, and EPDM (test in advance). It can be applied on horizontal and vertical surfaces, suitable for both indoor and outdoor applications such as sealing ducts, floor seals, expansion joints, wall-window frame connections, and below-ground-level structures. Also suitable for waterproofing under tiles in wet rooms and swimming pools. Perfect for airtight sealing of the building envelope. Airtightness has been tested according to EN 12114 and EN 1026. Not suitable for PE, PP, PTFE, and non-treated Bitumen. Properties Waterproof & airtight Excellent adhesion on many surfaces (without primer) Can be applied on moist surfaces Weather & UV resistant Chlorine and salt water resistant Self-levelling Non-shrinking Permanently elastic (>250%) Paintable and plasterable Free of bitumen, isocyanates, and solvents
Content: 7 Kilogramm (€12.59 / 1 Kilogramm)
Griffon SMP-300® grey cartridge 290ml
Premium waterproof and airtight elastic coating based on innovative polymer technology. Field of application Designed for waterproofing cracks in roofs (repair), dome windows, pipe transits, and other building components. Suitable for both horizontal and vertical applications, it effectively seals and protects a wide range of materials including concrete, metal, stone, wood, zinc, PVC, and EPDM (always perform a test in advance). Ideal for interior and exterior applications such as basements, terraces, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer in damp environments like bathrooms and swimming pools. Offers airtight sealing of the building envelope from both the outside and inside, meeting airtightness requirements according to EN 12114 and EN 1026. Properties 100% waterproof & airtight Can be applied on moist surfaces Superior adhesion Weather & UV resistant Suitable for all (construction) materials & surfaces Does not shrink Permanent elasticity (>250%) Indoor & outdoor use Ready to use Easy application with cartridge gun Paintable & plasterable Protects metals from corrosion Resistance to chlorine and salt water Free of bitumen, isocyanates, and solvents
Content: 0.29 Liter (€24.69 / 1 Liter)
Griffon SMP-300® grey tin 1kg
Premium waterproof and airtight elastic coating based on innovative polymer technology. Field of application Designed for waterproofing cracks in roofs (repair), dome windows, pipe transits, and other building components. Suitable for horizontal and vertical applications, it effectively seals and protects a wide variety of materials, such as concrete, metal, stone, wood, zinc, PVC, and EPDM (always test in advance). Ideal for both interior and exterior applications including basements, terraces, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer below tiles in damp environments like bathrooms and swimming pools. Perfect for airtight sealing of the building envelope from both the outside and inside, meeting airtightness requirements according to EN 12114 and EN 1026. Properties 100% waterproof & airtight Can be applied on moist surfaces Superior adhesion Weather & UV resistant Suitable for all (construction) materials & surfaces Does not shrink & self-leveling Permanent elasticity (>250%) Indoor & outdoor use Ready to use Easy to apply with brush, roller, or spatula Paintable & plasterable Protects metals from corrosion Resistance to chlorine and salt water Free of bitumen, isocyanates, and solvents
Griffon SMP-300® white bucket 14kg
Elastic waterproof and airtight coating based on innovative SMP-technology. Field of application Designed for sealing, protecting, and repairing roofs, walls, cracks, joints, ducts, and connections. This coating offers excellent adhesion (without primer) on a wide variety of materials, such as concrete, metal, stone, wood, zinc, PVC, and EPDM (test in advance). Can be applied on horizontal and vertical surfaces and suitable for indoor and outdoor applications, such as sealing ducts, floor seals, expansions joints, wall-window frame connections, and below-ground-level structures. Also suitable for waterproofing under tiles in wet rooms and swimming pools. Perfect for airtight sealing of the building envelope. Airtightness has been tested according to EN 12114 and EN 1026. Not suitable for PE, PP, PTFE, and non-treated Bitumen. Properties Waterproof & airtight Excellent adhesion on many surfaces (without primer) Can be applied on moist surfaces Weather & UV resistant Chlorine and salt water resistant Self-levelling Non-shrinking Permanently elastic (>250%) Paintable and plasterable Free of bitumen, isocyanates, and solvents
Content: 14 Kilogramm (€12.21 / 1 Kilogramm)
Griffon SMP-300® white bucket 7kg
Elastic waterproof and airtight coating based on innovative SMP-technology. Field of application Designed for sealing, protecting, and repairing roofs, walls, cracks, joints, ducts, and connections. This coating exhibits excellent adhesion (without primer) on a wide variety of materials, including concrete, metal, stone, wood, zinc, PVC, and EPDM (test in advance). It can be applied on both horizontal and vertical surfaces, making it suitable for indoor and outdoor applications such as sealing ducts, floor seals, expansion joints, wall-window frame connections, and below-ground level structures. Additionally, it is suitable for waterproofing under tiles in wet rooms and swimming pools. Perfect for achieving airtight sealing of the building envelope. Airtightness has been tested according to EN 12114 and EN 1026. Not suitable for PE, PP, PTFE, and non-treated Bitumen. Properties Waterproof & airtight Excellent adhesion on many surfaces (without primer) Can be applied on moist surfaces Weather & UV resistant Chlorine and salt water resistant Self-levelling Non-shrinking Permanently elastic (>250%) Paintable and plasterable Free of bitumen, isocyanates, and solvents
Content: 7 Kilogramm (€12.59 / 1 Kilogramm)
Griffon SMP-300® white cartridge 290ml
Premium waterproof and airtight elastic coating based on innovative polymer technology. Field of application Ideal for waterproofing cracks in roofs (repair), dome windows, pipe transits, and other building components. Suitable for horizontal and vertical applications, this coating effectively seals and protects a wide variety of materials, including concrete, metal, stone, wood, zinc, PVC, and EPDM (always test in advance). Excellent for both interior and exterior applications, such as basements, terraces, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer in damp environments like bathrooms and swimming pools. Perfect for airtight sealing of the building envelope from the outside and inside. Meets airtightness requirements according to EN 12114 and EN 1026. Properties 100% waterproof & airtight Can be applied on moist surfaces Superior adhesion Weather & UV resistant Suitable for all construction materials & surfaces Does not shrink Permanent elasticity (>250%) Indoor & outdoor use Ready to use Easy application with cartridge gun Paintable & plasterable Protects metals from corrosion Resistance to chlorine and salt water Free of bitumen, isocyanates, and solvents
Content: 0.29 Liter (€24.69 / 1 Liter)
Griffon SMP-300® white tin 1kg
Premium waterproof and airtight elastic coating based on innovative polymer technology. Field of application Designed for waterproofing cracks in roofs (repair), dome windows, pipe transits, and other building components. This coating is suitable for both horizontal and vertical applications, offering effective sealing and protection for a wide variety of materials, including concrete, metal, stone, wood, zinc, PVC, and EPDM (always test in advance). Ideal for both interior and exterior applications such as basements, terraces, balconies, roofs, gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints, and ground level items. Also suitable as a waterproof layer below tiles in damp environments like bathrooms and swimming pools. Perfect for achieving airtight sealing of the building envelope from both the outside and inside. Meets airtightness requirements according to EN 12114 and EN1026. Properties 100% waterproof & airtight Can be applied on moist surfaces Superior adhesion Weather & UV resistant Suitable for all construction materials & surfaces Does not shrink & self-leveling Permanent elasticity (>250%) Indoor & Outdoor Ready to use Easy to apply with brush, roller, or spatula Paintable & plasterable Protects metals from corrosion Resistance to chlorine and salt water Free of bitumen, isocyanates, and solvents